Roberts Radio RD-46 User Manual

12

1.  Carefully extend the telescopic aerial.

2.  Press the On/Off button to switch on your radio. The display will show 

"Roberts" for a few seconds. 

3.  Press the Band button to select the FM band.

4.  Press and release the Select button until the display  shows "Auto 

tune <>".

5.  Press  the  Tuning  Up  button  your  radio  will  scan  in  an  upwards 

direction (low frequency to high frequency) and stop automatically

when it finds a station of sufficient strength.

6.  After a few seconds the display will update and show station name.

7.  Press the Tuning Down button to scan the FM band in a downwards 

direction (high frequency to low frequency).

8.  When the waveband end is reached your radio will recommence tuning 

from the opposite waveband end.

9.  Adjust the Volume and tone control to the required setting.

10. To switch off your radio press the On/Off button.

3

2

4

7

5