Roberts Radio 105 User Manual
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
46
Music Player
Prune servers
Your radio stores details of UPnP servers that it has seen via its network
connection in its internal memory. If you use the radio at different locations
you may fi nd that there are servers listed by the radio that you are no longer
interested in. The prune servers functions allows the list to be updated
so that only active UPnP severs on the currently connected network are
shown when selecting 'Shared Media' from the Music Player menu.
1. Press and hold the Menu button to enter the main Music Player menu.
2. Rotate
connection in its internal memory. If you use the radio at different locations
you may fi nd that there are servers listed by the radio that you are no longer
interested in. The prune servers functions allows the list to be updated
so that only active UPnP severs on the currently connected network are
shown when selecting 'Shared Media' from the Music Player menu.
1. Press and hold the Menu button to enter the main Music Player menu.
2. Rotate
the
Tuning/Select control until 'Prune servers' is highlighted
on the display. Press the control.
3. To remove servers that are no longer required rotate the Tuning/Select
control until 'YES' is highlighted on the display. Press the control to
cause the servers to be removed.
cause the servers to be removed.
4. If you do not wish to prune servers rotate the Tuning/Select control
to highlight 'NO' and press the control to confi rm.
Wake On LAN
If you are using a computer as a UPnP server for playing your music fi les
via your radio, you may not wish to keep that computer operating when
you are not listening via your radio. If your computer is suitably confi gured,
it can either shut down, or enter a standby or hibernation state when it
is not being used.
Your radio can wake up a computer which has shut down using a Wake
On LAN command via the network provided that the radio has previously
connected to a UPnP server application on that computer. A computer
which is not currently active will be shown with a question mark in the
list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the
radio in all modes, and may require software, device driver, BIOS, hardware
or router confi guration changes for this function to operate. Failure of a
computer to respond to Wake On LAN is not considered a fault of the radio.
via your radio, you may not wish to keep that computer operating when
you are not listening via your radio. If your computer is suitably confi gured,
it can either shut down, or enter a standby or hibernation state when it
is not being used.
Your radio can wake up a computer which has shut down using a Wake
On LAN command via the network provided that the radio has previously
connected to a UPnP server application on that computer. A computer
which is not currently active will be shown with a question mark in the
list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the
radio in all modes, and may require software, device driver, BIOS, hardware
or router confi guration changes for this function to operate. Failure of a
computer to respond to Wake On LAN is not considered a fault of the radio.
1
2-4