Roberts Radio 105 User Manual

If you wish to completely reset your radio to its initial state this may be 
performed by following this procedure. By performing a factory reset, all 
user entered settings will be erased.
1.  Access the menu for the current mode by pressing the Menu button. 

Rotate the Tuning/Select control to highlight the 'Main menu' option, 
then press the control to select. 

2. Rotate 

the 

Tuning/Select control until 'System settings' is highlighted 

and then press the control to select. 

3. Rotate 

the 

Tuning/Select control until 'Factory Reset' is highlighted 

and then press the control. Rotate the Tuning/Select  control  and 
highlight 'YES' to proceed.

 

If you do not wish to carry out a system reset, highlight 'NO' and then 
press the control. The display will revert to the previous menu.

4. With 

'YES' highlighted, press the Tuning/Select control. The radio 

will restart as if fi rst plugged in and a full reset will be performed. The 
preset stations will be erased and your wireless network connection 
details will be lost. All confi guration settings will be restored to their 
defaults, the clock and alarms will be reset. The radio will then launch 
the 'Setup wizard'. If you wish to leave the radio in a reset condition, 
switch off the radio at this point.

In case of malfunction for any reason, reset the product as described 
above to resume normal operation. It may be necessary in some cases 
to disconnect the mains power and remove batteries, then reconnect 
power after 10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the 
product as above (reconnection of the power source may be required) to 
resume normal operation.

1

1-4