Roberts Radio ecologic 7 User Manual

The Nap timer facility allows you to set your radio to wake you after a 
predetermined interval (up to 2 hours) without needing to set the alarm. 
The nap timer can be set when your radio is switched on or in stand-by 
mode. The nap timer should only be used when the radio is powered from 
the mains. The radio's clock does not operate when the radio is in standby 
and powered solely from its batteries.

1. Press 

the 

On/Off button to switch on the radio if required.

2. Press 

the 

Menu button once or twice as needed until "Main Menu" 

appears on the display. Rotate the Tuning/Select control until "Utility" 
shows on the display.

3.  Press and release the Tuning/Select control to enter the Utility menu 

and rotate until "Nap" appears on the display. Press and release the 
Tuning/Select control to enter Nap timer setup.

4. Rotate 

the 

Tuning/Select control until the required Nap time setting 

is selected. Press Tuning/Select control to confi rm the setting. The 
Nap timer can be set to between 5 and 120 minutes (in 5 minute 
increments) or to Off.

 

5. The Nap Timer indicator   will show on the display when in 

stand-by mode. When the selected Nap timer has elapsed, the buzzer 
will sound.

6.  To cancel the buzzer press the On/Off button.To disable the Nap timer 

go back into the Nap timer settings (steps 1 to 4 above) and select 
the Off option in step 4.

1

2

2-6

28