Roberts Radio ecologic 7 User Manual

33

If your radio fails to operate correctly, or some digits on the display are 
missing or incomplete carry out the following procedure.

1. Press 

the 

On/Off button to switch on the radio.

2. Press 

the 

Menu button once or twice as needed until "Main Menu" 

appears on the display. Rotate the Tuning/Select control until "Set 
up" shows on the display.

3. Press 

the 

Tuning/Select control to enter the Set up menu and rotate 

until "Factory Reset" appears on the display. Press and release the 
Tuning/Select control. Rotate the Tuning/Select control and highlight 
'Yes' to proceed.

 

If you do not wish to carry out a system reset, highlight "No" and then 
press the control.

4.  With "Yes" highlighted, press the Tuning/Select control. A full reset will 

be performed. The station list and presets will be erased. The alarm 
setting will be cancelled, display brightness and sleep timer settings 
will be set to their default values. The clock will be reset and the unit 
will behave as when fi rst switched on (see page 6).

In case of malfunction due to electrostatic discharge, reset the product 
as described above to resume normal operation. If you are not able to 
perform the reset operation as above, removal and reconnection of the 
power supply and batteries may be required.

If a problem persists our technical staff would be pleased to offer any 
assistance on operating the radio. Our technical helpline number is 
020 8758 0338.

1

2

2-4