Roberts Radio R9939 User Manual
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
020 8758 0338 (Mon-Fri)
Automatic FM setup
When your radio is first connected to a power supply (batteries or mains)
or after a power failure (when backup batteries are not installed), the
Auto setup will automatically search the FM waveband and store
stations in presets.
or after a power failure (when backup batteries are not installed), the
Auto setup will automatically search the FM waveband and store
stations in presets.
1. Install batteries or connect to mains (see page 6). Your radio will
show start searching the FM waveband.
2. Your radio will automatically switch off and return to time display
when setup is complete. (Setting the clock time is described on page
7)
7)
3. Press the On/Off button to switch on your radio and press one of
the Preset buttons to select a station.
4. Adjust the volume using the Volume control. To switch off your
radio press the On/Offbutton.
Note:- Auto setup can take 3-4 minutes to complete and is depend-
ent on the signal strength and number of stations in your area.
To interrupt the Auto setup press and release the Memo button.
Should Auto setup fail, setting FM pre-setting stations can be
carried out manually as described in the following sections.
ent on the signal strength and number of stations in your area.
To interrupt the Auto setup press and release the Memo button.
Should Auto setup fail, setting FM pre-setting stations can be
carried out manually as described in the following sections.
2
3
3
4
4