Roberts Radio R9940 User Manual
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
020 8758 0338 (Mon-Fri)
Search tuning
1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat
pressing of the Waveband button. The
waveband selected will appear in the display.
On FM fully extend the Telescopic aerial. On
MW and LW rotate your radio for best reception.
waveband selected will appear in the display.
On FM fully extend the Telescopic aerial. On
MW and LW rotate your radio for best reception.
3. Press and hold down either the Tuning + or -
buttons until the frequency in the display begins
to change rapidly. Release the button.
to change rapidly. Release the button.
4. Your radio will scan the selected waveband,
stopping each time it finds a station of sufficient
strength. Adjust the Volume and Tone controls
to the required settings.
strength. Adjust the Volume and Tone controls
to the required settings.
11