Roberts Radio RD-28 User Manual
7
Finding new stations
As time passes new stations may become available. To fi nd new stations
proceed as follows:-
proceed as follows:-
1. Press and release the Auto Tune button, the display will show Autotune
Quick scan. Your radio will perform a scan of the UK DAB frequencies.
As new stations are found the station counter on the right-hand side
of the display will increase and stations will be added to the list.
As new stations are found the station counter on the right-hand side
of the display will increase and stations will be added to the list.
2. To carry out a full scan of the entire DAB Band III frequencies press
and hold down the Auto Tune button for more than 2 seconds and
then release. The display will show Autotune Full scan. As new stations
are found the station counter on the right-hand side of the display will
increase and stations will be added to the list.
then release. The display will show Autotune Full scan. As new stations
are found the station counter on the right-hand side of the display will
increase and stations will be added to the list.
Autoselect
As an alternative to pressing the Select button to select a station your
radio can be set so as to automatically select a station.
radio can be set so as to automatically select a station.
1. Rotate
the
Tuning control a few clicks in either direction, immedi-
ately press and hold down the Select button until the display shows
Autoselect ON.
Autoselect ON.
2. Rotate
the
Tuning control until the station you require is visible on
the display. After a few seconds your radio will automatically select
the station shown on the display.
the station shown on the display.
3. To switch off autoselect rotate the Tuning control a few clicks in either
direction, immediately press and hold down the Select button until
the display shows Autoselect OFF.
the display shows Autoselect OFF.
1
2
1
1