Roberts Radio RD-3 User Manual

9

1. Fully extend the telescopic aerial

2. Press the On/Off button to switch on your radio. The display will

show "Roberts DAB digital radio" for a few seconds.

3. Press the DAB/FM button to select the FM band.

4. Press and immediately release the Auto Tune button, your radio will

scan in an upwards direction (low frequency to high frequency) and
stop automatically when it finds a station of sufficient strength.

5. After a few seconds the display will update and show station name.

6. To find other stations press and release the AutoTune button as

before.

7. To scan the FM band in a downwards direction (high frequency to low

frequency) press and hold down the Auto Tune button for 2 seconds
and then release.

8. When the waveband end is reached your radio will recommence

tuning from the opposite waveband end.

9. Adjust the Volume and Tone controls to the required settings.

10. To switch off your radio press the On/Off button.

rd-3 instruction book.pmd

7/9/2003, 11:06 AM

10