Roberts Radio RD-3 User Manual

12

There are 10 memory presets for each of the 2 wavebands.

1. Press the On/Off button switch on the radio.

2. Tune to the required station as previously described.

3. Press and hold down the required Preset button until the display

shows e.g.  Preset 1 stored. The  station will be stored under the
chosen preset button. Repeat this procedure for the remaining
presets.

4.  Presets 6 to 10 are obtained by pressing +5 followed by Preset

button 1 to 5. e.g preset 7 can be set by pressing +5 followed by
holding down  Preset button 2 until the display shows Preset 7
stored.

5. Stations stored in preset memories may be overwritten by following

the above procedure.

rd-3 instruction book.pmd

7/9/2003, 11:06 AM

13