Roberts Radio R9943 User Manual
19
Reset button
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
missing or incomplete carry out the following procedure.
1. With the aid of a suitable implement (the end of a paper clip) press
the reset button located on the underside of your radio for at least
5 seconds, this will reset the microprocessor, clock time and clear
all stations stored in preset memory.
5 seconds, this will reset the microprocessor, clock time and clear
all stations stored in preset memory.
If a problem persists our technical staff would be pleased to help
offer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
offer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
General
Do not allow this radio to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage such as
in a parked car where the heat from the sun can build up even though
the outside temperature may not seem too high. It is recommended that
the FM band be used wherever possible as better results in terms of
quality and freedom from interference will usually be obtained than on
the MW or LW bands.
leave your radio where excessive heat could cause damage such as
in a parked car where the heat from the sun can build up even though
the outside temperature may not seem too high. It is recommended that
the FM band be used wherever possible as better results in terms of
quality and freedom from interference will usually be obtained than on
the MW or LW bands.