Roberts Radio RecordR User Manual

16-19

16-19

17-20

16. Press the Tuning Up or Down buttons to choose the alarm day. Skip 

to step 18 below.

17. Press and release the Select button. The day of the week will fl ash 

on the display. Press the Tuning Up or Down buttons to choose the 
desired day of the week.

18. Press and release the Select button. The alarm source option will 

show on the display.

19. Repeatedly press the Tuning Up or Down  buttons to choose the 

desired alarm source (DAB, FM, SD or Buzzer).

 

If setting the alarm to the radio option, the radio alarm may be set to 
any of the stations which have been stored as presets.

 Press 

the 

Tuning Up or Down buttons to choose from preset 1-5 on 

the display.

 

Note: That you can only set the alarm to use a preset which has 
already been stored. Please see 'Presetting stations' page 18.

20. Press and release the Select button to confi rm your alarm settings. 

The display will show 'Exit with saving'. Press and release the Select 
button to save your settings.

Active alarms are indicated in the display by the alarm symbol.

When the alarm activates it will start softly and gradually increase in level.
The fi nal volume is set by the volume control.
Note: It is not possible to lower the volume of your radio fully while playing 
an alarm. This is because your radio modifi es the volume control behaviour 
during an alarm so that an alarm can still be heard even if the control was 
accidentally set to minimum.
Important: If using the SD card for the source for the alarm, then be sure 
to have inserted an SD card see page 21.