Roberts Radio RecordR User Manual
5
Using the AC adaptor
1. Place your radio on a fl at surface.
2. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
3. Insert the adaptor plug into the DC socket located on the left hand side
of your radio. Plug the adaptor into a standard 13 amp mains socket
outlet. The display will show 'Welcome ROBERTS' for a few seconds.
outlet. The display will show 'Welcome ROBERTS' for a few seconds.
IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio
from the mains completely, the mains adaptor should be removed from
the mains socket outlet completely.
the radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio
from the mains completely, the mains adaptor should be removed from
the mains socket outlet completely.
Characters appearing on the LCD display indicate that the radio is connected
to and powered from the mains supply.
to and powered from the mains supply.