Lightolier PA2M1675 Leaflet
Ceiling Cutout: 11 1/16" L x 6 3/16" W
Ordering Information: MR 16 Series A
Cat. No.
Lamp
Ceiling Trim
Aperture Finish
PA2M167EBL
(2) 75W MR 16*
Overlap
Black with White Flange
PA2M167EWL
(2) 75W MR 16*
Overlap
White with White Flange
PA2M167EBTL
(2) 75W MR 16*
Trimless
Black
PA2M167EWTL
(2) 75W MR 16*
Trimless
White
Add a “1” for 120v or “2” for 277v at the *50W max. lamping when using accessories
end of the catalog number for voltage
PA2M167EBL = (Flanged) Black/White
PA2M167EWL = (Flanged) White
PA2M167EWL = (Flanged) White
PA2M167EBTL = (Trimless) Black
PA2M167EWTL = (Trimless) White
PA2M167EWTL = (Trimless) White
14
8
10
20 1/8"
14"
9"
Flanged
Trimless
17 3/8" L X 10" W
5" OC
6
5
9
11
4
12, 13
3
2
1
10" L X 5" W Opening
1 3/4"
8 3/4
Depth
17"
7
Top View
Calculite
®
ProSpec
®
Linear Downlight
PA2M1675
Page 1 of 2
2 Light MR 16 Series A
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die cast aluminum.
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die cast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and
45° (on length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC and UL & CSA requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250° C Teflon
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC and UL & CSA requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250° C Teflon
®
leads.
10. Junction Box: 14 ga. steel, 4 x 3 1/2 x 2" box. Allows inspection
from below.
11. Lamp and Accessory Support: .032" steel, flared for easy entry of
Media Cartridge.
12. Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing: Die formed 18 ga. steel.
13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing: Die formed 18 ga. steel.
Electrical
Electric Transformers: Offer reliable operation and are accessible from below
for servicing. 12V. Secondary 75 VA. each lamp.
Electronic Controls: Use only dimmers specifically designed for use with
magnetic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
for servicing. 12V. Secondary 75 VA. each lamp.
Electronic Controls: Use only dimmers specifically designed for use with
magnetic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens, and louvers, (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon
®
is a registered trademark of E. I. DuPont.
US Patent Pending
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage