Intel Pentium 4 (551) JM80547PG0961M User Manual

                                               

   

47

 

must not induce continuous stress onto the processor with the exception of a uniform load to 
maintain the heat sink-to-processor thermal interface. It is not recommended to use any portion of 
the processor interposer as a mechanical reference or load bearing surface for thermal solutions.

NOTES: 

This specification applies to a uniform load.

4. This is the maximum static force that can be applied by the heatsink and clip to maintain the heatsink and 

processor interface.

5. These parameters are based on design characterization and not tested.
6. Dynamic load specifications are defined assuming a maximum duration of 11ms.

The Pentium 4 processor in the 423-pin package can be inserted and removed 30 times from a 423-
pin socket meeting the 423-Pin Socket Design Guidelines document. Note that this specification is 
based on design characterization and is not tested.

 

Table 28 specifies the processor’s mass. This includes all components which make up the entire 
processor product.

The Pentium 4 processor is assembled from several components. The basic material properties are 
described in Table 29.

Static

25

lbf

1, 2, 3

Dynamic

100

lbf

1, 3, 4

Pentium 4 processor, 31mm OLGA

23