Chief Manufacturing PLP Series User Manual

Installation Instructions

PLP Series

7

To attach the PSB to the display, do the following:

To help your identify the correct PSB that matches
the model number of your display, refer to the cross-
reference chart at

To download the corresponding PSB installation
instructions, refer to

Contact Customer Service at 952-582-6480 if you
have any questions about how to select the PSB that
matches the model number of your display.

To install the display, do the following:

NOTE: Verify that all

power/audio/video cables

 are

disconnected from the display and the latching
flag is lowered in the down position before
attempting to mount the display.

1. With the aid of another person, lift the display up to

the mount on the wall, aligning mounting buttons
with the teardrop slots on the mount, and lower the
display firmly into place (Figure 8).

2. Raise the latching flag to secure the display (see

Figure 9). If the flag does not fully engage, check to
ensure the mounting buttons are fully seated in the
slots.

NOTE: A padlock may be installed through the hole in

the latching flag for additional security.

To remove the display from the mount, do the following:

1. Disconnect all power/audio/video cables.

2. Lower the latching flag to unlock the display (refer to

Figure 9).

3. With the aid of another person, lift the display up and

out of the teardrop slots in the mount to remove the
display.

Latching
Flag

Teardrop Slot

PLP

Display

PSB