Chauvet 330SR User Manual
Legend™ 330SR Spot QRG
EN
4
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
voltage range of 100~240 VAC, 50/60 Hz.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Legend™ 330SR Spot will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
DMX serial connection. A DMX Primer is available from
DMX Connection
The Legend™ 330SR Spot uses a regular DMX data connection for its DMX
personalities: Mode1 (21) and Mode2 (27). See the User Manual to connect
and configure for DMX operation.
personalities: Mode1 (21) and Mode2 (27). See the User Manual to connect
and configure for DMX operation.
Mounting
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the
currently selected value into the selected function
currently selected value into the selected function
<UP>
Navigates upwards through the menu list and
increases the numeric value when in a function
increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and
decreases the numeric value when in a function
decreases the numeric value when in a function
Secure the safety cable using
the passageway on the back
of the product.
Overhead Mounting
Floor Mounting
Safety Cable
(works with CH-05 from
CHAUVET®)
Mounting Clamps
(such as CLP-15 or CLP-15N
clamp from CHAUVET®)