Dometic 3200 Series User Manual

Clean your SeaLand toilet regularly for maximum sanitation and operational ef-

ficiency. You can clean it just as you would a household toilet.

do not use caustic

chemicals, such as drain-opening types, as they will damage the seals.
boWL cLeANING: For stubborn stains, use SeaLand Toilet Bowl Cleaner

(fig. A). It’s manufactured especially for use with SeaLand ceramic toilets. In

certain locations where water is hard, a build-up of lime may dull the toilet bowl

finish. Restore the shine with this cleaner. If you cannot find our brand in your

area, contact SeaLand Product Customer Service for your nearest dealer. If it

is not available, you can also use most non-abrasive bathroom and toilet bowl

cleaners (Bar Keeper's Friend

spray cleaner, Clorox

toilet bowl cleaner, Sani-

Flush

toilet bowl cleaner, etc.). Please follow label instructions.

SeAL cLeANING: After an extended time, mineral deposits from hard water

can build up under the edge of the rubber bowl seal, resulting in a slow leakdown

of water from the bowl. To prevent this mineral build-up, periodically clean under

the bowl seal with SeaLand Toilet Bowl Cleaner (fig. B).
. Shut off water supply.

2. Apply cleaner onto a cleaning tool (soft-bristle brush, etc.), open the flush

ball by pressing on flush lever, and scrub under the seal. Make sure to push

bristles between bottom of seal and top of flush ball surface to scrub all parts

of seal that come into contact with flush ball.

3. Close ball and wait 2-3 minutes.

4. Open flush ball. Use brush and water to rinse away cleanser and loosened

deposits.

PRoPeR cLeANING ANd MAINTeNANce

At the end of each traveling season, the SeaLand toilet should be winterized for storage by using potable water-

safe antifreeze in the system.
To use antifreeze:

. Empty the blackwater tank.

2. Thoroughly flush system with fresh water.

3. Empty freshwater tank and blackwater tank.

4. Add freshwater antifreeze to freshwater tank.

5. Flush freshwater antifreeze through toilet and into the blackwater tank. Each installation is different, so amounts

may vary. User discretion is required to assure adequate protection.

6. Turn off electrical power.
NoTe: Use nontoxic antifreeze designated for potable water systems. (See vehicle owner’s manual.)

cAuTIoN: Never use automotive-type antifreeze in freshwater systems.

WINTeRIzING

Water Valve
Vacuum Breaker Assembly

SPARe PARTS

The following spare parts should be kept available at all times:

Flush Ball Seal
Flush Ball

description

Part Number

Quantity

see parts list
see parts list

description

Part Number

Quantity

see parts list
see parts list

fig. b

To avoid damaging the Teflon

-coated seal, do NoT uSe:

– abrasives (Comet

, Soft Scrub

cleansers etc.)

– caustic chemicals (Drano

clog remover, etc.)

– lubricants and cleaners containing alcohols or

petroleum distillates

(Pam

cooking spray, Pine-Sol

cleaner, Wd-40

lubricant, etc.).

fig. A

® Bar Keepers Friend is a registered trademark of SerVaas

Laboratories Inc.

® Clorox, Pine-Sol and Soft Scrub are registered trademarks of

The Clorox Co.

® Comet is a registered trademark of Prestige Brands International.

® Drano is a registered trademark of S.C. Johnson & Son Inc.

® Pam is a registered trademark of ConAgra Foods.

® Sani-Flush is a registered trademark of Reckitt Benckiser Inc.

® Teflon is a registered trademark of DuPont Co.

® WD-40 is a registered trademark of WD-40 Company.