Franke Consumer Products FQD 907 User Manual
EN
2
0
0
20
Flue assembly
The chimney can only be installed with exhausting
hood
hood
• Fasten the angle iron 15 to the hood canopy using the
screws 12d (2,9 x 9,5) provided.
Upper exhaust flue
• Slightly widen the two sides of the upper flue and
• Slightly widen the two sides of the upper flue and
hook them behind the brackets 7.2.1, making sure
that they are well seated.
that they are well seated.
• Secure the sides to the brackets using the 4 screws
12c (2,9 x 6,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook
• Slightly widen the two sides of the flue and hook
them between the upper flue and the wall, making
sure that they are well seated.
sure that they are well seated.
• Fix the lower part laterally to the hood body using
the 2 screws 12c (2,9 x 6,5) supplied.
12c
2.1
2.2
2
7.2.1
12c
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole
switch having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Mainte-
nance) being sure that the connector of the feeding
cable is correctly inserted in the socket placed on the
side of the fan.
cable is correctly inserted in the socket placed on the
side of the fan.