Bosch D1256RB User Manual
D1255RB/D1256RB/D1257RB | Installation Instructions | 4.0
D1256RB Programming Requirements
12
Bosch Security Systems, Inc. | 8/06 | F01U011791B
4.4.5
Keypad (Command Center) Functions
The following keypad function must be enabled or
passcode required to enable the [DETECTOR RESET]
key.
passcode required to enable the [DETECTOR RESET]
key.
•
#27 Reset Sensors
Include the following items in the menu:
•
#9 View Event Memory
•
#10 View Point Status
•
#12 Fire Test
•
#21 View Log
•
#29 Remote Program
•
#32 Display Rev
Refer to Figure 18.
For the D9412GV2 Control Panel, program
each of the keypad functions with E
(enabled) and not P (passcode required). If
restricting any of the keypad functions with
a passcode is required, those functions
must be executed from a custom function
that includes an authorized passcode.
each of the keypad functions with E
(enabled) and not P (passcode required). If
restricting any of the keypad functions with
a passcode is required, those functions
must be executed from a custom function
that includes an authorized passcode.
Example (Refer to Figure 18.): If the
keypad function View Memory is
programmed as P (passcode required), and
the passcode 125600 has authority to
execute it, the keystrokes would be:
keypad function View Memory is
programmed as P (passcode required), and
the passcode 125600 has authority to
execute it, the keystrokes would be:
[A] [4] [0] [1] [2] [5] [6] [0] [0] [E]
When creating a Menu Function List for a
keypad address, consider that the
D1256RB Keypad does not have numeric
keys. Ensure that:
keypad address, consider that the
D1256RB Keypad does not have numeric
keys. Ensure that:
•
no passcode-protected keypad functions
are in a Menu Function List enabled at
an address that coincides with the
installed address for a D1256RB
Keypad.
are in a Menu Function List enabled at
an address that coincides with the
installed address for a D1256RB
Keypad.
•
the
CC# Menu Key Lock
prompt is set
to
No for the D1256RB address.
Figure 18: Example – Keypad Functions
Keypad Functions
#
Functions
Command
E/P
*
1 Disarm
?
P
2
Master Arm Delay ?
CMD 1
P
3
Master Arm Instant ?
CMD 11
4
Perimeter Instant ?
CMD 2
P
5
Perimeter Delay ?
CMD 3
P
6
Watch Mode ?
CMD 6
E
7
Perimeter Part ?
CMD 8
P
8
View Area Status ?
P
9
View Memory ?
CMD 40
E
10
View Pt Status ?
E
11
Walk Test ?
CMD 44
E
12
Fire Test ?
CMD 58
P
13
Send Report ?
CMD 41/42
P
14
Door Control ?
CMD 46
P
Cycle Door ?
E
Unlock Door ?
E
Secure Door ?
E
37
Access Control Level?
P
15
Change Display ?
CMD 49
E
16
Change Time/Date ?
CMD 45
E
17
Change Passcode ?
CMD 55
P
18
Add User ?
CMD 56
P
19
Del User ?
CMD 53
P
20
Extend Close ?
CMD 51
P
21
View Log ?
E
22
Print Log ?
P
23
User Command 7 ?
CMD 7
P
24
User Command 9 ?
CMD 9
P
25
Bypass a Point ?
CMD 0
P
26
Unbypass a Point ?
CMD 00
P
27
Reset Sensors ?
CMD 47
E
28
Change Relays ?
CMD 54
P
29
Remote Program ?
CMD 43
P
30
Move To Area ?
CMD 50
P
32
Display Rev ?
CMD 59
E
33
Service Walk ?
P
34
Default Text ?
CMD 57
P
35
Change Skeds ?
CMD 52
P
36
Invisible Walk ?
P
*
Keypad Function options: P = Passcode;
E = Enabled (no passcode required);
Blank = Disabled
E = Enabled (no passcode required);
Blank = Disabled