DMP Electronics XR2400F User Manual
11
User Menu
Ambush Codes
Your system may be programmed to allow user number one (1) to be
an Ambush code. This Ambush code functions identically to a
standard code with the exception that it sends a silent alarm to the
central station. This silent alarm alerts the operator to a duress
situation at the premises and prompts the immediate notification of
authorities.
an Ambush code. This Ambush code functions identically to a
standard code with the exception that it sends a silent alarm to the
central station. This silent alarm alerts the operator to a duress
situation at the premises and prompts the immediate notification of
authorities.
Deleting User Codes
1. Access the User Menu.
2. Press COMMAND until USER CODES? displays.
3. Press any SELECT key. ADD DEL CHG is displayed.
4. Press the SELECT key under DEL to delete a user code from the
system. You must have a user code level of 9 or have a custom
user code with that authority to be able to delete a user code.
user code with that authority to be able to delete a user code.
5. At the USER NUMBER: - prompt, enter the user number you
want to delete and press COMMAND. The displays changes to
USER # DELETED.
USER # DELETED.
6. The display then changes back to USER NUMBER: - allowing
you to delete another user. Press the ARROW key twice to exit
the User Menu.
the User Menu.
Changing User Codes
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any SELECT key. ADD DEL CHG is displayed.
4. Press the SELECT key under CHG to change a user code.
5. At the USER NUMBER: - prompt, enter the user number to
change and press COMMAND.
6. The display changes to CODE NO: * * * * *. Press a SELECT key
and enter the new user code. Press COMMAND.
Note: Changing a user code does not change the user number.
7. The display then shows the current user name. Press any top
row key to clear. To enter a Custom Name, press the number key
above the letter that you wish to enter. Each number key
displays three letters. Press the top row select key under the
letter you wish to enter. Repeat until entire name is entered.
above the letter that you wish to enter. Each number key
displays three letters. Press the top row select key under the
letter you wish to enter. Repeat until entire name is entered.
8. The display changes to LEVEL CUSTOM. Refer to Adding User
Codes on the previous page for a description of this prompt.
9. After entering the authority level, the displays shows USER #
CHANGED for five seconds followed by USER NUMBER: -.
This display allows you to enter another user number to change.
Press the ARROW key twice to exit the User Menu.
This display allows you to enter another user number to change.
Press the ARROW key twice to exit the User Menu.