Bosch FPD-7024 User Manual

Shortcut: 0-PROG, 3-PROG SYSTEM, 7-REMOTE PGM

Remote programming allows the panel to be called from a remote site by phone to reconfigure
any of the programmable options. When remote programming is disabled, you can still
connect to the control panel for diagnostics and to view the existing program. PIN numbers
are suppressed while remote programming is disabled.

REMOTE PGM
0- DISABLE
1- ENABLE

Press [0/Prog] to select DISABLE or [1] to select ENABLE, and the previous window appears.

Danger!
After any programming change, and especially after remote program changes, completely
check operation of the control units. Hazards to life and property can result if the system is
not tested for incorrect programming.

 

PROG INPUTS
1- POINT NUMBER
2- POINT FUNCT
3- POINT COPY

Notice!
Point functions allow quick programming of similarly functioning points (for example, pull sta-
tions, smoke detectors) with common settings.

 
For more information on point functions, see Point function, 70.

Shortcut: 0-PROG, 4-PROG INPUTS, 1-POINT NUMBER

POINT NUMBER (1-255):_____
Enter the point number you wish to program and press [#/Enter]. Once you have entered the
point number, the display scrolls through the following PROG INPUT options:

PROG POINT
0- FUNCTION
1- ALARM/TROUBL
2- OUTPUT ZONE
3- VERIFICATION
4- LATCHING
5- DESCRIPTION
<DRILL> NEXT PNT
<HIST> PREV PNT

Press the number key that corresponds to your selection.

 

 

Fire Alarm Control Panels

Control Panel Programming | en

Bosch Security System, Inc.

Installation and Operation Manual

2012.08 | 04 | F01U008458