Bosch FPD-7024 User Manual
COPY FROM
POINT:_______
POINT:_______
Enter the point you wish to copy from and press [#/Enter]. COPY TO FIRST POINT:_______
Enter the first point you wish to copy to and press [#/Enter]. COPY TO LAST POINT:_______
Enter the last point you wish to copy to and press [#/Enter]. The PROG INPUTS menu appears.
This feature does not copy the description. Point copy is intended for use only on input
points. Do not copy from an output point (future use), or copy over a programmed output
point. The copy operation automatically stops, with an error message, if outputs are
encountered. While copying to a large number of points, the remote keypads might briefly
show system fault, because the keypads are not updated during the copy operation.
Enter the first point you wish to copy to and press [#/Enter]. COPY TO LAST POINT:_______
Enter the last point you wish to copy to and press [#/Enter]. The PROG INPUTS menu appears.
This feature does not copy the description. Point copy is intended for use only on input
points. Do not copy from an output point (future use), or copy over a programmed output
point. The copy operation automatically stops, with an error message, if outputs are
encountered. While copying to a large number of points, the remote keypads might briefly
show system fault, because the keypads are not updated during the copy operation.
PROG OUTPUTS
PROG OUTPUTS
1- NACs
2- RELAYS
1- NACs
2- RELAYS
Programming NACs
Shortcut: 0-PROG, 5-PROG OUTPUTS, 1-NACs
The main control panel includes two local NACs (NAC 1 and NAC 2). The FPD‑7024 can also
support up to four FPP‑RNAC‑8A‑4C Remote NAC Power Supplies, which offers a total of 16
remote NACs (four NACs per RNAC).
The following window appears:
support up to four FPP‑RNAC‑8A‑4C Remote NAC Power Supplies, which offers a total of 16
remote NACs (four NACs per RNAC).
The following window appears:
NAC OUTPUTS
1- LOCAL
2- REMOTE 1
3- REMOTE 2
4- REMOTE 3
5- REMOTE 4
1- LOCAL
2- REMOTE 1
3- REMOTE 2
4- REMOTE 3
5- REMOTE 4
Press the number key that corresponds to your selection.
Local NACs
Shortcut: 0-PROG, 5-PROG OUTPUTS, 1-NACs
The display scrolls through the NAC options. Press [1] for LOCAL. The following window
appears:
appears:
ONBOARD NAC
1- NAC #1
2- NAC #2
1- NAC #1
2- NAC #2
Press the number key that corresponds to your selection. The display scrolls through the
following selection:
following selection:
PROG NAC
1- AUTO SILENCE
2- CONFIGRATION
3- ZONE ASSIGNS
1- AUTO SILENCE
2- CONFIGRATION
3- ZONE ASSIGNS
Press the number key that corresponds to your selection.
If you select [2] from the PROG NACs menu, the following selections scroll:
If you select [2] from the PROG NACs menu, the following selections scroll:
8.5
8.5.1
Fire Alarm Control Panels
Control Panel Programming | en
73
Bosch Security System, Inc.
Installation and Operation Manual
2012.08 | 04 | F01U008458