Siemens CFVA-IP User Manual
Restarting the IP Module
14
Restarting the IP Module
Certain settings changes (e.g. network settings) will only come into effect after a
device restart.
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Restart in the Configuration menu.
device restart.
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Restart in the Configuration menu.
The Restart dialogue window opens:
Fig. 7
Restart
There are three ways of performing a restart:
Manual restart
Time controlled restart
Restart by Ping Watchdog
Manual restart
1. Click on the Restart now button.
1. Click on the Restart now button.
The device will restart immediately.
The device requires about 40 seconds for the restart. No communication can
take place with the device during this period.
The device requires about 40 seconds for the restart. No communication can
take place with the device during this period.
Time controlled restart
1. Activate the Enable time controlled restart check box.
2. Enter the time in the box (HH:MM), e. g. 12:00.
3. Click on Save.
1. Activate the Enable time controlled restart check box.
2. Enter the time in the box (HH:MM), e. g. 12:00.
3. Click on Save.
The device will restart at the set time every day.
4. Restart the device to adopt the new settings.
29
Siemens Building Technologies
Fire Safety & Security Products