Siemens CFVA-IP User Manual

 

 

Read these instructions carefully before connecting the camera and the IP-
Module in order to avoid damage caused by improper installation or use. 

 

Installation may be done only by authorized personnel according to the local 
safety regulations. 

 

Operate the camera and the IP-Module only with the designated voltage. 

 

Follow the safety instructions for the camera and for the IP-Module. 

 

Never use the camera and the IP-Module for purposes other than those 
designated. 

 

Repairs and adjustments to the camera and the IP-Module may be done only by 
authorized personnel. 

 

If liquids or objects get into the housing, disconnect the camera and the IP-
Module from the power supply and have it checked by your authorized dealer 
before using it again. (Danger of electric shock!) 

 

This equipment has been tested and found to comply with the limits for a Class 
B digital device. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. 

 

This equipment may generate, uses and can radiate radio frequency energy 
and, if not installed and used according to instructions, may cause harmful 
interference with radio communications. 

 

Be aware that any modifications not explicitly approved in this manual may void 
your equipment warranty. 

 

The shielded interface cable recommended in this manual must be used with 
this equipment in order to comply with the limits for a digital output device. 

6 

Siemens Building Technologies 

 

Fire Safety & Security Products