LST NTM2402-1 Leaflet

NTM2402-1_DBL_LST_EN_0851.PDF • PAGE 2

Building Safety. Building Security.

Power supply housings

The wall-mount cabinet NTG24-1 provides space

for the power supply module as well as for the in-

stallation of 2 stand-by batteries with 12V/max.

45Ah, one Relay Module RL58-1 or RL58-2 and

one Multi Module MEA244-1/E. In this case, the

power supply module serves as power supply for

the multi module and the loads that are actuated

via the 4 outputs.Furthermore, via the inputs of

the multi module, fault messages can be forwar-

ded to the ﬁ re detection control panel.

If required, further modules can be mounted in

the cabinet door.

Thanks to the sophisticated design of the Po-

wer Supply Front Panel NTG24-1CE, it can be

mounted either on a 19“ pivoting frame or on the

mounting plate of a switch cabinet.

In both cases, the optional stand-by batteries

are accommodated in the interior of the switch

cabinet.

Power Supply Housing NTG24-1

Protection class

IP30

Dimensions W × H × D

442 × 460 × 203 (mm)

Colour

grey white, RAL 9002

Weight without installations

approx. 7kg

Order number

317030

Order name

Power Supply Housing NTG24-1

Power Supply Front Panel NTG24-1CE

Dimensions W × H × D

478 × 266 (6 HU) × 20 (mm) (without power supply module)

Colour

grey white, RAL 9002

Weight without installations

1.4kg

Order number

317031

Order name

Power Supply Front Panel NTG24-1CE

Speciﬁ cations

In addition to the power supply module, the Power Sup-

ply Front Panel NTG24-1CE can also accommodate a

Relay Module RL58-1 or RL58-2.

Both housings are made of powder coated sheet steel.

At the front of the housing, the built-in display and ope-

rating board allows the signalling of the most important

operating conditions as well as the resetting of the in-

ternal buzzer.

The display and operating elements can be labelled in

the respective national language by means of the sup-

plied insertable labelling strips.