Panasonic 3312F Leaflet

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet

Date of issue

Revision / Date of revision

MEW01119 2008-09-19

Type number

3312F

Analog base with fast connectors (blue) for the COM loop.

3312FL

Analog base with fast connectors (blue) for the COM loop and fast
connectors (grey) for one ext. LED (e.g. 2218).

3390

Label holder (100 holders per packet, excl. labels)

3391

Labels for 3390 (10 sheets à 132 labels)

SA Fast connector for COM loop (in/out)

SB Fast connector for COM loop (in/out)

Al Address

Label

Lss Locking screw stopper (for detector
type 33xx and 430x respectively)

E-

Fast connector for external LED

E+ Fast connector for external LED

NOTE! E- and E+ on 3312FL only.

The base is prepared for mechanical locking of the detector, when a detector with a locking
screw is plugged into the base. Connector wire

∅ 0.6 – 1.2 mm (approx. 0.28 – 1.13 mm

). If

wire

∅ 0.6 mm is used the release button may be pushed as the wire is pressed into the

connector. Analog detector types 33xx and 43xx can be plugged in the base 3312F / FL.

Technical data

Voltage (V DC)

Rated
allowed
normal

28
12-30
24 (COM loop voltage)

Current consumption at nom. volt.
from COM loop (mA)

quiescent (base only)
active (base only)

Depending on the type of detector that is plugged into the base.

0
0

Ext. LED connectors (3312FL only)

voltage (V)
max. current output (mA)

Depending on the detector plugged in the base. Normally:

5
2

Ambient temperature (

°C)

Operating
storage

-10 to +50
-20 to +70

Ambient humidity (% RH)

max. 95, non condensing

Ingress Protection rating (estimated)

IP51

Size

∅ x H (mm)

102 x 15

Weight 3312F / 3312FL (g)

41 / 47

Construction / Colour

ABS / Grey (N8, Munsell colour code)

Approvals

CE; Conforms with EN54-5 and -7 (when applicable)

102 mm

6.2

Lss (33xx)

73 mm

50 mm

OUT

Ext.
LED

Lss (430x)

Connectors
E+ and E-
not on 3312F