Panasonic S50PX20U Leaflet

TQZH507      Printed in Japan

 1. Align the support pole insertion holes of the plasma TV with the support poles     (1 each), and

lower the plasma TV until the poles stop. Slightly lift the left and right sides of the plasma TV and
remove the corner protection pads attached to the bottom.

2. Fasten the plasma TV and support poles     using assembly screws (black screws)    (

× 

4)

   Top crosspiece
   Bottom panel
   Side panel (Left)
   Side panel (Right)

   Rear cord cover

   Glass shelf
   Cord holder

   TBLA0117
   TBLH0550
   TBLA0104
   TBLA0103
   TBLB3110
   TKGA0129
   TBLA3217

TY-S42PX20U
Qty.  Part No.
  1   TBLA0116
  1   TBLH0548
  1   TBLA0104
  1   TBLA0103
  1   TBLB3080
  1   TKGA0127
  1   TBLA3184

Painted Surfaces:Use a damp cloth for cleaning. Do not use any abrasive or chemically treated cleaners.
NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures
or moisture, as this can result in serious irreparable damage.

Placement

 To thread wiring, remove the terminal cover and pass wires along the

grooves in the rear cord cover, along the groves in the left and right
side panels, and along the groves in the cord holder under the glass
shelf.

∗

 Some equipment may have short cords. In such an instance, thread

the wiring over the minimum distance, as indicated by the dotted line in
the diagram.

 After threading wiring, fasten with cord clamps   (

×

 6) so that the cords

do not protrude from the grooves. Finally, attach the terminal cover.

   If there are any cord clamps   left over, store them carefully. You will

need them if you use the unit to house more equipment in the future.

A study of the assembly instructions will not only save you time, but may prevent possible damage to your
new stand.
Assistance may be required for some assembly procedures.

CAUTION : THIS STAND IS DESIGNED ONLY FOR USE WITH A PANASONIC PLASMA TV.
APPLIED MODEL : TH-42PX20, TH-50PX20

Use with other appliances may result in instability causing possible injury.

Assembly screws

Glass shelf fastening screws

Glass shelf support fastening
screws (Black screws)    ( 

× 

4)

Rear cord cover fastening
screws (Black screws)    ( 

× 

3)

Assembly screws (Black screws)

Support pole (Right)

Support pole (Left)

Cord clamps

THEA118 

× 

4

THEA102N 

× 

8

XSB4+12FZ 

× 

7

XST5+12 

× 

4

XYN5+F55FZ 

× 

4

TBLA3194 

× 

2

TBLA3197 

× 

1

TBLB3111 

× 

6

Bottom cap (Right)

TBLB3107 

× 

1

Bottom cap (Left)

TBLB3108 

× 

1

Screws

XTB4+10B 

× 

4

TBLA3196 

× 

1

Support pole fastening screws

Glass shelf supports (Right)

Glass shelf supports (Left)

Casters (Wheels)

TBLA3195 

× 

2

TBLB3074 

× 

4

∗

 Wire over the minimum distance

Cord clamps 

Power cord

(Back)

∗

 The top glass shelf is specifically for the center speaker and AV

amp. If you place a video deck here, it may badly affect the picture.

     20421 84th Avenue South, Kent, Washington 98032                 Tel. : 1-800-833-9626                 Fax : 1-800-237-9080

2003 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

     5770 Ambler Drive, Mississauga, Ontario L4W 2T3                  Tel. : (905) 624-8447

2003 Matsushita Electric Industeial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

 

∗

 Install the plasma TV by referring to the following illustration.

 

∗

 Do not hold the plasma TV at the bottom of the front panel.

Lift and
remove

Support pole
(Left) 

Assembly screws
(Black screws) 

Corner
protection pad

Support pole (Right) 

Support pole
insertion hole

∗

 Position by placing your hands at the

points indicated in the illustration.

The tools required:

Plus (Phillips) (+) screwdriver