American Standard 0321.075 Leaflet

M27

© 2008 AS America Inc.

Revised 7/07

To Be Specified:
❏

  Color:  ❏ White   ❏ Bone   ❏ Silver

❏

  Faucet*:

❏

  Faucet Finish:

❏ 

 Supplies:

❏

  1-1/4" Trap:

❏

  Nipple:

❏

  Concealed Arms Support (by others):

* See faucet section for additional models available

•  Wall-hung sink
•  Vitreous china
•  Rear overflow
•  Soap depression
•  Faucet ledge 
    Shown with 2000.101 Ceramix faucet
    (not included)

❏

 

0321.026 With wall hanger (Illustrated)

 

Faucet holes on 102mm (4") centers

❏

 

0321.075 For concealed arms support

 

Faucet holes on 102mm (4") centers

   
Nominal Dimensions:  
470 x 432mm
(18-1/2" x 17")

Bowl sizes:
362mm (14-1/4") wide
273mm (10-3/4") front to back
152mm (6") deep

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.

*

 DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP 

ARE SUGGESTED.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within 

the range of tolerances established by ANSI Standard A112.19.2. These 

measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

FINISHED

WALL

102mm

(4)

FINISHED

FLOOR

1-1/4 O.D.

TAILPIECE

1-1/4 O.D.

WASTE

203mm

(8)

178mm

(7)

165mm

(6-1/2)

SUPPLIES

AS REQ'D.

197mm

(7-3/4)

470mm

(18-1/2)

57mm 
(2-1/4)

114mm 

(4-1/2)

178mm

(7)

432mm

(17)

483mm

(19)

267mm

(10-1/2)

114mm

(4-1/2)

70mm

(2-3/4)

38mm

(1-1/2)

76mm

(3)

89mm

(3-1/2)

343mm

(13-1/2)

235mm

(9-1/4)

11mm (7/16) DIA.
ANCHOR SCREW
HOLES

SOAP DEPRESSION

C/L

*

INTEGRAL 

BRACKETS

HANGER

*

787mm (31)
864mm (34)

19mm

(3/4)

406 mm

(16)

54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS