American Standard T373.520 User Manual

By restricting HANDLE rotation and limiting the

 

   amount of hot water allowed to mix with the  

 

   cold, the HOT LIMIT SAFETY STOP (1) reduces  

 

   risk of accidental scalding. To set the maximum  

 

   hot water temperature of your faucet, you  

 

   need to adjust the setting on the HOT LIMIT  

 

   SAFETY STOP (1).

Turn CARTRIDGE STEM (2) to the OFF position  

 

   (coldest setting) before making adjustment to  

 

   HOT LIMIT STOP (1). Use a flat blade  

 

 

   screwdriver to pry free the HOT LIMIT SAFETY  

  

 

STOP 

(1).

 

   Pull forward and rotate counterclockwise  

 

   one number to limit hot water temperature. 

 

   Use ARROW (3) on CARTRIDGE (4) and   

 

   NUMBERS (5) on HOT LIMIT STOP (1) for  

  

 

indication.

   Turn VALVE (1) "off".

With HANDLE (1) in "off" position, turn on water supplies and check all connections

  

 

for 

leaks.

Operate HANDLE (1) and flush water lines thoroughly. Pull DIVERTER (2) up and check  

 

   SHOWER (3) for proper operation.

Check SPOUT (4) and SHOWER (3) connections for leaks.

Remove PRESSURE BALANCE UNIT (5). Rotate PRESSURE BALANCE UNIT (5) 180˚ so that the inlets face up and the
large outlet port faces down.
Push PRESSURE BALANCE UNIT (5) in casting make sure inlets line up with holes in bottom of casting. Top flange should
butt up against top of casting. Reassemble FIXATION RING (4) and CARTRIDGE (1).

INLETS

LARGE OUTLET

M 9 6 8 2 8 5   R e v.   1 . 1

15

1

3

1

1

9

7

5

3

1

1

5

1

3

1

1

9

7

5

3

1

0 1 3 5 7 9 11 13 15

0 1 3 5 7 9 11 13 15