Enermax AL-089 User Manual

CONNECTOR TYPES

24P Mainboard

Native cable, 12V rail supplied by 12V1

For new generations of ATX/EEB/CEB server/workstation MB.

8P CPU +12V (700W)

Native cable, 12V rail supplied by 12V1

Supports multi-CPU server/workstation systems and some single socket
systems.

4+4P (8P) CPU +12V, in combined mode

Native cable, 12V rail supplied by 12V1

8-pin configuration supports multi-CPU server/workstation systems and
some single extreme CPU systems.

4+4P (8P) CPU +12V, in split mode

Native cable, 12V rail supplied by 12V1

4-pin configuration supports certain single CPU systems. Some multi-CPU
workstation/server system might also need this extra 4-pin 12V connector.

Please use the connector with “12V” marking.

6+2P (8P) PCI Express, in combined mode
8-pin configuration supports latest extreme graphic cards, which require
8-pin PCI-E connector.

6+2P (8P) PCI Express, in split mode / 6P PCI Express

6-pin configuration supports most performance PCI-E graphic cards, which
require 6-pin PCI-E connector.

SATA

# 1

For SATA/SAS drives.

4P Molex

# 2

For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P
power in socket.

FDD
For floppy drive or certain add-on card.

#1 Some SATA drives might accept SATA or 4P Molex power. Normally, use either one of

power connector to power the driver, BUT NOT BOTH! Please check the drive’s manual
or details.

#2 Some MB might require this connector to share the +12V current from 24-pin Mainboard

connector to PCI-E slot. If your MB already supports 24-pin Mainboard connector, you
may not need to add the 4P Molex connector on it. Please check the MB’s manual for details.

ENGLISH