AMX ENC6 Leaflet

Installation Guide

RDA-ENC2/ENC4/ENC6

Overview

The AMX Lighting™ RDA-ENC2 (FG606-10), RDA-ENC4 (FG606-11), and 
RDA-ENC6 (FG606-12) enclosures provide secure mounting for all Radia 
controllers/modules. The enclosures are CE, UL, and C-UL approved. 

Installation Instructions

• For indoor use only.
• Mount on vertical surface only.
• Maintain 12" (304.88 mm) minimum clearance above and below the enclo-

sure.

• Route class 1 conductors through upper conduit knockouts.
• Route class 2 conductors through lower conduit knockouts.
• Use 75°C (167°F) copper conductors only.
• Install filler plate #28-10500 (RDA-EFP) in all unused openings.
• Install only UL approved modules (see the UL Number Cross Reference to 

AMX Lighting ID table).

Enclosure Weights

• RDA-ENC2: 4.5 lb. (2.04 kg)
• RDA-ENC4: 7.5 lb. (3.40 kg)
• RDA-ENC6: 9.5 lb. (4.31 kg)

Radia enclosures must be mounted on a vertical surface with a minimum of 12" 
(304.8 mm) clearance above and below the enclosure. 

Dimensions between center lines (from FIG. 2):
RDA-ENC2:

• A to B = 5.25" (133.4 mm)
• B to C = 11.0" (279.4 mm)

RDA-ENC4:

• A to B = 10.0" (254.0 mm)
• B to C = 11.0" (279.4 mm)

RDA-ENC6:

• A to B = 16.0" (406.4 mm)
• B to C = 11.0" (279.4 mm)

Top, front, bottom, and side views of the RDA enclosures

Side View

(for all enclosures)

12.0"

(304.8 mm)

6.0" (152.4 mm)

0.75" (19.05 mm)

12.0"

(304.8 mm)

6.0"

(152.4 mm)

18.0"

(457.2 mm)

Bracket configuration

A to B

B to C

Bottom slot

Top slot

Configuration for
right and left 
mounting brackets
for all Radia
enclosures.

Maximum mounting
screw size: #12