American Standard 4205.001 Leaflet
SECURE FAUCET AND MAKE
WATER SUPPLY CONNECTIONS
WATER SUPPLY CONNECTIONS
Secure FAUCET (1) with ATTACHMENT NUTS (2) supplied.
(HAND TIGHTEN).
(HAND TIGHTEN).
Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (3) or 3/8"O.D. BULL-NOSE RISERS (4). Use
adjustable wrench to tighten connections. Do not over tighten.
Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
SUPPLIES (3) or 3/8"O.D. BULL-NOSE RISERS (4). Use
adjustable wrench to tighten connections. Do not over tighten.
Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
Certified to comply with ASME A112.18.1M
3
INSTALL FAUCET
FITTING WITH SPRAY
Install FAUCET (1) on sink. (No sealant is required
unless mounting deck on SINK is uneven).
unless mounting deck on SINK is uneven).
2
1
M968420 REV. 1.1
NOTE: FLEXIBLE SUPPLIES (3, 4) HAVE TO BE PURCHASED SEPARATELY
Place SPRAY HOLDER (1) into separate hole
of SINK (2) and assemble NUT (3) onto shank.
of SINK (2) and assemble NUT (3) onto shank.
From underside of SINK (2) and hand tighten
NUT (3).
NUT (3).
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
SINGLE CONTROL KITCHEN FAUCETS
4205.000
4205.001
4205.001
SINK OR DECK
1
1
2
3
(HAND TIGHTEN)
COUPLING NUT
FERRULE
1
3
4
2
Installation
Instructions
0
1
2
3
4
5
6
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
please read these instructions carefully before you begin.
Turn off water at
main supply.
CAUTION