American Standard 2023.214 Leaflet

K37

© 2008 AS America Inc.

Revised 2/08 

To Be Specified:
❏

  Color:

     ❏ White  ❏ Bone  ❏ Silver  ❏ Linen   ❏ Black  
❏

  Seat: (please specify color)

     ❏ Champion

®

 Slow Close Round Front #5330.010

     ❏ Rise & Shine Round Front #5322.011
     ❏

  EverClean

®

 Round Front Seat with Slow Close 

Snap-Off Hinges #5320.110

❏

  Supply with stop:

❑

  

• Vitreous china
•  EverClean

®

 surface inhibits the growth of  

stain- and odor-causing bacteria, mold,  
and mildew on the surface 

• Low-consumption (6.0 Lpf/1.6 gpf)
•  Features

 Champion® 4 Flushing System 

performance platform

•  4" non-adjustable, piston action Accelerator™  

flush valve

• Siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect

®

 tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory flush tested

• 2 bolt caps
• 10 year warranty

❑

  

3110.016 Bowl

❑

  

4266.014 Tank

Nominal Dimensions:  

721 x 464 x 797mm (28-3/8" x 18-1/4" x 31-3/8")

Fixture only, seat and supply by others

❑

  

4266.504 Tank complete with Aquaguard Liner

❑

  

4266.604 Tank complete with tank cover

 

locking device

❑

   

4266.704 Tank complete with Aquaguard Liner 

and tank cover locking device

❑

  

4266.804 Tank complete with trip lever

 

located on right side 

❑

  

4266.904 Tank complete with tank cover locking  

 

device and trip lever located on right side

❑

   

4266.954 Tank complete with Aquaguard Liner, 

tank cover locking device, and trip lever  
on right side  

 

 

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - 
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
  Supplementary Purchase Specification for 
  Non-Adjustability - July, 2003 revision

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the 

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility 

is assumed for use of superseded or voided pages.

SEE REVERSE FOR ADDITIONAL ROUGHING-IN 
DIMENSIONS