First Alert SCO7B Leaflet

Exclusive! A voice will tell you smoke or 
CO danger detected and one of 11 
pre-programmed alarm locations.

Provides 360 degrees of direct access 
to the smoke sensing chamber.

Varying horn tone makes it easier for elderly 
with normal age related hearing loss to hear 
the alarm.

Pins are provided to lock battery drawer 
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.

First Alert Model SCO7 is a battery operated single station photoelectric smoke 
and carbon monoxide combination alarm specifically designed for residential and 
institutional applications including sleeping rooms of hospitals, hotels, motels, 
dormitories, and other multifamily dwellings as defined in standard NFPA 101. 
Model SCO7 has been fully tested and complies with, UL217, UL2034, CSFM, 
NFPA 72, and NFPA 101 and other agencies that model their codes after the 
above agencies. It meets building codes where battery operated photoelectric 
smoke and carbon monoxide combination alarms are required and with model 
building codes published by the ICC.

First Alert Model SCO7 is a state of the art smoke and CO combination alarm 
designed to provide early warning of a fire or carbon monoxide danger. It 
features a photoelectric smoke sensing chamber, an electrochemical CO sensor 
and "Voice Warning with Location". This exclusive feature incorporates a voice 
that will speak one of 11 pre-programmed locations and the danger detected. 
When the alarm sounds (if programmed for "basement", for example) it will 
speak "Warning, evacuate, smoke in basement". It features a Sweeping Horn 
Tone that has a lower and varying frequency that makes it easier for the elderly 
with normal age related hearing loss to hear the horn. Two AA alkaline batteries 
power supply and a single button test/silence. This alarm has two silence 
features. Low Battery Silence: Temporarily silence the low battery chirp for up to 
eight hours. Alarm Silence: Silence alarm for several minutes. Optipath 360 
technology

TM

 provides 360 degrees of direct access to the smoke sensing 

chamber. It also features tamper resistant locking pins that lock the alarm to the 
mounting bracket and/or the battery drawer to prevent removal of battery. 
Battery installation and removal can occur while the unit is mounted 
to the ceiling or wall via the slide 
out battery drawer. Designed 
for wall or ceiling 
mounting. Includes 
mounting anchors 
and screws.