American Standard 2447.000 Leaflet

K99

© 2008 AS America Inc.

Revised 2/08 

❑

  

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

•  Space saving compact design - Elongated bowl    

fits in the same space as a round front toilet

• 12" (305mm) Rough-in
•  EverClean

®

 surface inhibits the growth of stain 

and odor causing bacteria, mold and mildew on 
the surface 

• Featuring the 

• Elongated siphon action jetted bowl with 

  2-1/8" trapway

• Internal trapway area fully glazed

• Generous 8" x 9" water surface area

•  Close coupled tank with flat tank cover for  

superior storage

• Oversized 3" Flush Valve with Chemical 

  Resistant Flapper

• Speed Connect

®

 tank to bowl coupling system

•  Sanitary dam on bowl with four point  

tank stabilization

• 2 color match bolt caps

• Chrome Trip Lever

•  Color matched solid plastic seat with cover 

• Wax ring gasket  with closet bolts

• 100% factory flush tested

• 5 year warranty

Nominal Dimensions:  

718 x 438 x 733mm

(28-1/4" x 17-1/4" x 28-7/8")

• ASME A112.19.2M for Vitreous China Fixtures - 

  includes Flush Performance, Ball Pass Diameter, 

  Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power    

  Supplementary Purchase Specification for

  Non-Adjustability

To Be Specified:
❏

 Color: ❏ White

❏

 Supply with stop

FINISHED WALL

FINISHED 

FLOOR

C/L OF OUTLET

191mm

(7-1/2)

716mm

(28-1/4)

15mm  (5/8) 

102mm

(4)

470mm

(18-1/2)

381mm

(15)

305mm

(12)

296mm

(11-5/8)

267mm

(10-1/2)

C/L OF SEAT POST 

HOLES 140mm 

(5-1/2 CENTERS)

SUPPLY

AS

REQ'D.

439mm

(17-1/4)

733mm

(28-7/8)

*203mm

(8)

355mm

(14)

*152mm

(6)

236mm

(9-5/16)

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 

OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*

 DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerance established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.