Manualsbrain.com
  1. Manuals
  2. Brands
  3. Marantz
  4. SR5005
  5. User Manual

Marantz SR5005 User Manual

Download
Page of 91
64
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Registering preset codes
 
n
Programming with the 4-digit code
1
Press and hold down the input 
source select buttons for the 
appliance to control, and press 
SET
 until the SEND indicator 
blinks twice. 
The back light flashes. 
2
Press the 4-digit code for the 
appliance using the numeric 
buttons (code table at the end of 
this book).
When  the  procedure  is  successful,  the 
SEND indicator blinks twice.
NOTE
If the indicator did not blink twice, then repeat 
steps 1 and 2 and try entering the same code 
again.
 
n
Scanning the code table
1
Switch on the appliance to 
control.
2
Press and hold down the input 
source select buttons for the 
appliance to control, and press 
SET
 until the SEND indicator 
blinks twice. 
The back light flashes. 
3
Aim the remote control at the 
appliance and slowly alternate 
between pressing 
INPUT
 d 
and 
SOURCE ON/OFF
 for the 
appliance.
4
Stop when the appliance turns 
off.
5
Press 
ENTER
 once to lock in the 
code.
 
n
Checking the code
1
Press and hold down the 
input source select buttons for 
appliance to control, and press 
SET
 until the SEND indicator 
blinks twice and back light 
flashes. 
The back light flashes.
2
Press 
SEARCH/INFO
.
The SEND indicator blinks twice.
3
To view the code for first digit, 
press 1 once.
Count  the  number  of  times  the  SEND 
indicator  blinks  (e.g.  3  blinks  =  3)  and 
write down the number.
4
Then press 2 to check the second 
digit of the code. Now press 3 and 
4  to  check  the  third  and  fourth 
digits of the code.
NOTE
If a code digit is “0”, the SEND indicator does 
not blink.
 
n
Resetting the code
The  devices  shown  below  are  registered  for  each  input  source 
button  as  default.  Settings  can  be  changed  according  to  the 
devices to be used. 
1
Press and hold down the 
input source select buttons for 
appliance to control and press 
SET
 until the SEND indicator 
blinks twice.
The back light flashes. 
2
Press the codes below to reset the 
code. 
The indicator will blink twice.
Input source select
buttons
Category
Preset code
Blu-ray Disc player
5000
DVD player
2000
Television
1000
Satellite set top box
4000
CD player
3000
NOTE
After this procedure, the selected source reset to its initial code.