Marantz ES7001 User Manual

 • This item is used to set the distance 

between the unit and audience.

  •  Hold down the SEAT button on the remote 

controller for over two seconds to change 
the setting.

    Each time you hold down the button for over 

two seconds while the viewing/listening 
distance indication is displayed in the 
display window, the setting switches as 
described below.

   This item is set to “Approx. 2 m” at the 

factory.

2 m or 

shorter 

Approx. 

2 m 

2 m or 
longer

SEAT button

(Hold down over 

two seconds.)

¶

¶

¶

  •  When the audience is 2.5 m (98 1⁄2 inches) 

or farther away from the unit with the 
viewing/listening distance set to “2 m or 
longer,” the stereophonic effect of the 
speakers may be reduced.

  •  When the audience is close 1.5 m (59 1/8 

inches) or less to the unit with the viewing/
listening distance set to “2 m or shorter,” the 
stereophonic effect of the speakers may be 
reduced. 

 • Press the SUBWOOFER button on the remote 

controller when you use a commercially 
available or optional SW7001 subwoofer with 
a built-in amplifier so that the SUB WOOFER 
indicator lights. The subwoofer output is 
activated, enabling output of low-frequency 
sound from the connected subwoofer. 
The low-frequency sound from this unit is 
adjusted so that it does not overlap with that 
from the connected subwoofer.

 • To turn off the subwoofer output, press 

the SUBWOOFER button on the remote 
controller once to display the “On” indication 
in the display window, then press it again 
while the indication is displayed. 

   The indication in the display window 

changes to “OF” and the SUB WOOFER 
indicator goes out. The subwoofer output 
is set to off and low-frequency sound of the 
unit is restored.

  •  This setting is set to “On” at the factory.

SUBWOOFER 

button

Lights

¶

¶

 • Be sure to set the subwoofer output to off 

when you do not use an external subwoofer. 
Optimum low-frequency sound is only 
output from the speakers built in the unit 
with the subwoofer output set to off.

 • You cannot adjust the volume level of the 

connected subwoofer with this unit. Adjust 
it with the connected subwoofer. 

ES7001_U_01_Eng.indd   18

ES7001_U_01_Eng.indd   18

07.7.31   1:42:36 PM

07.7.31   1:42:36 PM