Canon RS-CL07 User Manual

7

Hook the Base bracket on the protrusion (A)

of the Joint fitting, and secure it temporarily

using the four supplied M5 screws (B).

● Pull out the cables as shown.
● Be sure to secure screws (B) tightly after making

the  adjustment  discussed  in  "Adjusting  the

8

1  Connect cables to the projector.
2  Affix the supplied Canon logo seal as

shown.

After completion of installation, adjust

the projection angle (page 11).

A

B

For WUX10 MarkII/SX7 MarkII/SX60/X700,

affix an additional seal at the back.

B