Panasonic SC-HTB10 User Manual
15
Operating Instructions
Specifications
Dimensions (WkHkD):
(Without wall mount bracket)
800 mmk108 mmk58 mm
(With wall mount bracket)
800 mmk108 mmk80 mm
Mass:
(Without wall mount bracket)
Approx. 3.2 kg
(With wall mount bracket)
Approx. 3.3 kg
Operating temperature range:
0
o
C to r40
o
C
Operating humidity range:
20 % to 80 % RH (no condensation)
RMS Output Power
Front ch:
30 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
120 W
(Except Continental Europe, Australia and
New Zealand)
PMPO Output Power:
PMPO Output Power:
980 W
FRONT SPEAKERS (BUILT-IN)
Type:
1 way, 1 speaker system (Bass Reflex)
Full range:
6.5 cm Cone typek2
SUBWOOFER (BUILT-IN)
Type: 1 way, 1 speaker system (Bass Reflex)k2
Woofer:
Woofer:
8 cm Cone typek2
HDMI
This unit supports “HDAVI Control 5” function.
HDMI input
Input connector:
Type A (19 pin)
HDMI AV output
Output connector:
Type A (19 pin)
Digital Audio Input (TV only)
Optical digital input:
Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format:
Audio Format:
LPCM, Dolby Digital
IR Blaster
Terminal 1:
3.5 mm jack
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum
analyzer.
Audio information
∫ Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround, 2-channel
LPCM and multi-channel LPCM.
≥ When using the optical digital audio cable, this
Dolby Digital, DTS Digital Surround, 2-channel
LPCM and multi-channel LPCM.
≥ When using the optical digital audio cable, this
system is not able to play audio with a sampling
frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be
automatically cancelled if the audio signal’s
sampling frequency is greater than 48 kHz.)
frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be
automatically cancelled if the audio signal’s
sampling frequency is greater than 48 kHz.)
GENERAL
Power consumption:
30 W
Power consumption in standby mode:
Approx. 0.2 W
Power supply:
(Continental Europe, Australia and New
Zealand)
Zealand)
AC 220 V to 240 V, 50 Hz
(Others)
AC 110 V to 127 V/220 V to 240 V, 50/60 Hz
AMPLIFIER SECTION
SPEAKER SECTION
TERMINAL SECTION
SCHTB10EGGNGS_RQTX1160-B.book Page 15 Monday, May 10, 2010 1:59 PM