Panasonic SC-HTB65 User Manual
Getting started
RQT9763
17
≥ Connect only after all other connections are completed.
≥This system consumes a small amount of AC power (> 25) even when it is turned off. In the interest of
power conservation, if you will not be using this system for a long time, unplug it from the household
AC outlet.
By using the Bluetooth
®
connection, you can listen
to the sound from the Bluetooth
®
audio device
from this system wirelessly.
Preparation
≥ Turn on the Bluetooth
®
feature of the device and
place the device near the main unit.
Press [ ] to select “ ”.
≥ If the “
” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ”
indicator flashes quickly.
≥ If the “
” indicator flashes slowly, repeat step 2.
Select “SC-HTB70” or “SC-HTB65”
from the Bluetooth
®
device’s
Bluetooth
®
menu.
≥ If prompted for the passkey on the Bluetooth
®
device, enter
“0000”.
≥ Once the Bluetooth
®
device is connected, the “
” indicator
stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
device is paired, the device that has not been used for the
longest time will be replaced.
Press [ ] to select “ ”.
≥ If the “
” indicator lights, a Bluetooth
®
device is already
connected with this system. Disconnect it. (> below)
Select “SC-HTB70” or “SC-HTB65”
from the Bluetooth
®
device’s
Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes
slowly.
slowly.
≥ When “
” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth
Bluetooth
®
device.
≥ The Bluetooth
®
device will be disconnected if a different
audio source (e.g. “TV“) is selected.
≥ Refer to the operating instructions of the Bluetooth
®
device
for further instruction on how to connect a Bluetooth
®
device.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to “Bluetooth
≥ To change the sound quality, refer to “Bluetooth
®
communication mode” on page 20.
AC power supply cord connection
A To a household AC
outlet
B AC power supply
cord (supplied)
Saving energy
The main unit is designed to conserve its power consumption and save energy.
≥
The main unit is designed to conserve its power consumption and save energy.
≥
The main unit will automatically switch to standby mode
when
no signal is input and no operation is performed for approx. 30 minutes.
Bluetooth
®
connection
AC IN
Bluetooth
®
pairing
Connecting a Bluetooth
®
device
SC-HTB65_70PPC_RQT9763-1P.book Page 17 Thursday, February 7, 2013 4:24 PM