Panasonic SC-PTX5 User Manual

R

QTX

00

14

∫

This works only when the elapsed play time can be displayed. It also 
works with all JPEG content.

∫

(Continued on next page)

[DVD-A]

 

(motion picture part) 

[DVD-VR] [DVD-V]

To change play speed
– from “

k0.6” to “k1.4”

≥ Press [1 PLAY] to return to normal play.
≥ After you change the speed

– Audio output switches to PCM-2 channel.
– Sampling frequency of 96 kHz is converted to 

48 kHz.

≥ This function may not work depending on the disc’s 

recording.

(

➜ page 16, Repeat play)

Except 

[JPEG] [DVD-VR] (Still picture part) 

To repeat a specified section
Press [ENTER] at the starting and ending points.
Press [ENTER] again to cancel.

[DVD-VR] (Except still picture part) 
[DVD-V] (Except 

iR/iRW) 

Allows you to browse the disc contents and start 
playing from the selected position. You can select 
either “Intro Mode” or “Interval Mode” in “Advanced 
Disc Review” in the “Disc” menu (

➜ page 23).

When you find a title/program to play
Press [

1 PLAY].

≥ This may not work depending on the disc and the 

play position.

≥ [DVD-VR] This does not work when playing a playlist 

(

➜ page 19).

Normal
Cinema1:  Mellows images and enhances detail in 

dark scenes.

Cinema2: Sharpens images and enhances detail in 

dark scenes.

Animation: Suitable for animation.
Dynamic: Enhances the contrast for powerful images.
User:

Press [ENTER] to select “Picture 
Adjustment” (

➜ below).

Contrast:

Increases the contrast between light and 
dark parts of the picture.

Brightness: Brightens the picture.
Sharpness: Adjusts the sharpness of the edges of 

horizontal lines.

Color:

Adjusts the shade of the picture’s color.

Gamma:

Adjusts the brightness of dark parts.

Depth Enhancer: Reduces the rough noise in the 

background to give a greater feeling 
of depth.

To select suitable picture quality with your television
(Video recordings will be converted to, and output as, 
high-definition video.)

When HDMI connection is being used and “Video 
Mode” (

➜ page 25, “HDMI” menu) is set to “On”

480i (interlaced)
480p (progressive)
720p (progressive)
1080i (interlaced)
1080p (progressive)

≥Select a video output with an “¢” mark. The “¢” 

mark shows that the video output is acceptable 
with your television.

≥Selecting a video output without an “¢” mark can 

result in the picture being distorted.
If the picture is distorted, press and hold 
[CANCEL] until the picture is displayed correctly. 
(The output will return to “480p”.)

≥Output from the COMPONENT VIDEO OUT 

terminals will be “480i”.

When HDMI connection is not being used or “Video 
Mode” (

➜ page 25, “HDMI” menu) is set to “Off”

480i (interlaced)
480p (progressive)

≥When you select “480p”, a confirmation screen 

appears. Select “Yes” only if connecting to a 
progressive output compatible television.

If you have chosen “480p”, “720p”, “1080i” or “1080p” 
(

➜ above), select the method of conversion for 

progressive output to suit the type of material.

Auto1: Detects 24 frame-per-second film content and 

appropriately converts it.

Auto2: Compatible with 30 frame-per-second film 

content in addition to 24 frame-per-second film 
content.

Video: Select if the video content is distorted when 

using Auto1 or Auto2.

This works when the HDMI connection is being used and 
“Video Mode” (

➜ page 25, “HDMI” menu) is set to “On”.

,------. 1,------.2,------.3 (sharpest picture)

^------------------------------------J

This works when the HDMI connection is being used and 
“Video Mode” (

➜ page 25, “HDMI” menu) is set to “On”.

≥ If the setting above is not compatible with your 

television, it will not be displayed.

≥ “RGB Range” (

➜ page 25, “HDMI” menu) is available 

when “RGB” is selected.

0014En_p14-25.fm  Page 21  Friday, June 8, 2007  11:50 AM