Panasonic SC-PT75 User Manual

RQ

TX10

18

  

Before requesting service, make the following checks. If you are in doubt 
about some of the check points, or if the solutions indicated in the 
following guide do not solve the problem, consult your dealer for 
instructions.

Insert the AC mains lead securely. (B 7)

The Sleep timer was working and had reached the set time limit. (B 4)

Select “BRIGHT” in “FL DIMMER” in the OTHERS menu. (B 17)

≥ You inserted a disc the unit cannot play; insert one it can. (B 18)
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized.

≥ You have not inserted a disc; insert one.
≥ You have not inserted the disc correctly; insert it correctly. (B 11)

[PT75]

The USB device is drawing too much power. Switch to DVD/CD mode, 
remove the USB and turn the unit off.

Check and correct the speaker cable connections. If this does not fix the 
problem, consult the dealer. (B 6)

There is a power supply problem. Consult the dealer.

Disc may be dirty. Wipe it clean.

Incorrect operation performed. Read the instructions and try again.

“DVD H∑∑”
“DVD F∑∑∑”

∑ stands for a number.
≥ Trouble may have occurred. The numbers following “H” and “F” depend 

on the status of the unit. Turn the unit off and then back on. 
Alternatively, turn the unit off, disconnect the AC mains lead, and then 
reconnect it.

≥ If the service numbers fail to clear, note the service number and contact 

a qualified service person.

“U70∑”

∑ stands for a number. (The actual number following “U70” will depend on 

the state of the main unit.)
≥ The HDMI connection acts unusually.

– The connected equipment is not HDMI-compatible.
– Please use HDMI cables that have the HDMI logo (as shown on the 

cover).

– The HDMI cable is too long.
– The HDMI cable is damaged.

Match the modes on the main unit and remote control. Depending on the 
number being displayed (“1” or “2”), press and hold [OK]9 and the 
corresponding numbered button ([1] or [2]) for at least 2 seconds. (B 4)

≥ This unit cannot play discs other than the ones listed in these operating 

instructions. (B 18)

≥ The unit may not be operating properly due to lightning, static electricity 

or some other external factor. Turn the unit off and then back on. 
Alternatively, turn the unit off, disconnect the AC mains lead, and then 
reconnect it.

≥ Condensation has formed. Wait 1 to 2 hours for it to evaporate.

≥ Check that the batteries are installed correctly. (B 8)

≥ The batteries are depleted. Replace them with new ones. (B 8)

≥ Aim the remote control at the remote control signal sensor and operate. 

(B 4)

Change the remote control operating mode. (B 4)

≥ Check the video or speaker connection. (B 6, 7)

≥ Check the power or input setting of the connected equipment and the 

main unit.

≥ Check that the disc has something recorded on it.

Reset all the settings to Factory Preset.
While stopped and “DVD/CD” is the source, press and hold [∫]8 (Stop) 

on the main unit and [S10]3 on the remote control until “INITIALIZED” 

disappears from the TV. Turn the unit off and on again.
All settings will return to the default values.
(This does not work during program and random modes, or when setup 
menu or START menu is displayed.)

Characters other than English alphabet and Arabic numerals may not be 
displayed correctly.

Depending on the condition of this unit or the connected equipment, it 
may be necessary to repeat the same operation so that the function can 
work correctly. (B 14)

The setting you made in “TV ASPECT” (B 16, VIDEO menu) 
or “LANGUAGE” (B 16, DISPLAY menu) does not work.

The settings for “TV ASPECT”

§1

 and “LANGUAGE”

§2

 will automatically 

follow the information from the TV. (B 8, Easy setup settings)

§1

When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or 
later” compatible TV

§2

When using VIERA Link “HDAVI Control” with “HDAVI Control 2 or 
later” compatible TV

≥ Play may take time to begin when an MP3 track has still picture data. 

Even after the track starts, the correct play time will not be displayed. 
This is normal. [MP3]

≥ This is normal on DivX video. [DivX]

[VCD]

This is normal for Video CDs.

[VCD]

 with playback control

Press [∫ STOP]5 twice and then press [1 PLAY]5.

[DVD-V]

These functions do not work with some DVD-Videos.

≥ This unit may not play WMA and MPEG4 that contains still picture data.
≥ If playing DivX VOD content, refer to the homepage where you 

purchased the DivX VOD content. (Example: www.divx.com/vod) [DivX]

≥ If a disc contains CD-DA and other formats, proper playback may not be 

possible.

≥ Display the subtitles. (“SUBTITLE” in Menu 1) (B 13)
≥ Subtitles may not be displayed depending on the disc. [DivX]

The end of an item becomes point B when it is reached.

≥ Select “DVD/CD” as the source.
≥ Cancel Program and Random play. (B 11)

SC-PT75-70G-RQTX1018-2B_eng.book  Page 20  Wednesday, September 30, 2009  5:44 PM