Panasonic PT-DZ16KU User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
106 - ENGLISH
8) Press qw to switch the item.
[ON]
Returns the response when the ID setting is GROUP.
[OFF]
Does not return the response when the ID setting is GROUP.
Note
f
Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (x page 161).
[STATUS]
Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[STATUS] screen is displayed.
3) Press qw to switch the pages.
f
The page will change each time you press the button.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[LAMP1]
Displays the runtime and status of Lamp 1.
[LAMP2]
Displays the runtime and status of Lamp 2.
[LAMP3]
Displays the runtime and status of Lamp 3.
[LAMP4]
Displays the runtime and status of Lamp 4.
[INTAKE AIR TEMP.]*
1
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]*
1
Displays the status of the internal temperature of the projector.
[AROUND LAMP TEMP.]*
1
Displays the status of the temperature around the lamps of the projector.
[REMOTE2 STATUS]
Displays the control status of the REMOTE2.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[LAMP UNIT MODEL NO.]
Displays the model no. of the lamp unit.
[LAMP1 SERIAL NUMBER]
Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER]
Displays the serial number of the lamp 2.
[LAMP3 SERIAL NUMBER]
Displays the serial number of the lamp 3.
[LAMP4 SERIAL NUMBER]
Displays the serial number of the lamp 4.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the firmware version of the projector.
[ON COUNT]
[POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] - [LAMP4 ON]
Displays the number of times the lamp is turned on.
[SHUTTER]
Displays the number of times the shutter is closed.
[NUMBER OF ENTRY
SIGNAL]
Displays the number of registered signals.
[AC VOLTAGE]
Displays the status of the AC voltage.
[COOLING CONDITION]
Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.