Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DX800U
  5. User Manual

Panasonic PT-DX800U User Manual

Download
Page of 108
[DISPLAY OPTION] menu 
ENGLISH - 55
Settings
Select [DISPLAY OPTION] from the main menu, 
and select the item from the sub-menu. 
Refer to “Navigating through the menu” 
(
 page 41) regarding the operation of the menu 
screen. 
 
z
After selecting the item, press ▲▼◀▶ to set. 
[COLOR MATCHING]
You can correct the color difference between the sets 
when multiple sets are to be used simultaneously. 
1)  Press ▲▼ to select [COLOR MATCHING]. 
2)  Press ◀▶ to switch [COLOR MATCHING]. 
 
z
The setting will change as follows each time 
you press the button.
[OFF]
[3COLORS]
[MEASURED]
[7COLORS]
[OFF]
Color matching adjustment is not 
carried out. 
[3COLORS] [RED], [GREEN], and [BLUE] can 
be adjusted.
[7COLORS]
[RED], [GREEN], [BLUE], [CYAN], 
[MAGENTA], [YELLOW], and 
[WHITE] can be adjusted.
[MEASURED]
Refer to “Adjusting the color 
matching using a colorimeter” 
(
 page 56) regarding details about 
this mode. 
 
■If [3COLORS] or [7COLORS] was 
selected in Step 2) 
3)  Press the <ENTER> button. 
 
z
The 
[3COLORS] or [7COLORS] screen is 
displayed. 
4)  Press ▲▼ to select [RED], [GREEN], 
or [BLUE] (if [7COLORS] was selected, 
select [RED], [GREEN], [BLUE], 
[CYAN], [MAGENTA], [YELLOW], or 
[WHITE]). 
5)  Press the <ENTER> button. 
 
z
The 
[3COLORS:RED], [3COLORS:GREEN], 
[3COLORS:BLUE], or [3COLORS:WHITE] 
screen is displayed. 
In case of the 
[7COLORS], [7COLORS:RED], 
[7COLORS:GREEN], [7COLORS:BLUE], 
[7COLORS:CYAN], [7COLORS:MAGENTA], 
[7COLORS:YELLOW], or [7COLORS:WHITE] 
screen is displayed. 
6)  Press ◀▶ to adjust the level. 
 
z
The adjustment values will change between [0]
*1
 
and [2048]. 
*1:  The minimum values differ depending on the color to 
adjust. 
Note
 
z
Operation when correcting the adjustment color 
When the correction color same as the adjustment 
color is changed: 
Luminance of the adjustment color will change. 
When correction color red is changed: Red is 
added to or subtracted from the adjustment color. 
When correction color green is changed: Green is 
added to or subtracted from the adjustment color. 
When correction color blue is changed: Blue is 
added to or subtracted from the adjustment color. 
 
z
This adjustment should be carried out by a person 
who is familiar with the projector or by a service 
person because a high level of skill is required to 
make a successful adjustment.
 
z
Pressing the <DEFAULT> button will restore the 
factory default settings for all items.
 
z
When any setting other than [OFF] has been 
selected for [COLOR MATCHING], [AI] and [COLOR 
CORRECTION] are fixed to [OFF], and [COLOR 
TEMPERATURE] is fixed to [USER]. (However, 
[WHITE BALANCE HIGH] cannot be adjusted.) 
[DISPLAY OPTION] menu