Panasonic PT-DX800U User Manual

You can set the <REMOTE 2 IN> terminal. 

1)  Press ▲▼ to select [REMOTE2 MODE]. 
2)  Press ◀▶ to switch [REMOTE2 

 

z

The setting will change as follows each time 

you press the button.

The pin assignment of the 

<REMOTE 2 IN> terminal is used 

by the factory default setting of the 

projector. 

(



 page 100)

Used to change the setting of the 

<REMOTE 2 IN> terminal. 

■When selecting [USER] in Step 2)

3)  Press the <ENTER> button.
4)  Press ▲▼  to select an item from 

[PIN2] to [PIN8], and press ◀▶ to 

Displays the status of the projector. 

1)  Press ▲▼ to select [STATUS]. 
2)  Press the <ENTER> button. 
3)  Press ◀▶ to switch the pages. 

Displays the input terminal currently 

selected. 

Displays the input signal name. 

Displays the frequency of the input 

signal. 

Displays the operation hours of the 

projector. 

Displays the lighting time of the lamp 1. 

Displays the lighting time of the lamp 2. 

Displays the status of the air intake 

temperature of the projector. 

Displays the status of the internal 

temperature of the projector. 

Displays the status of the 

temperature around the lamps of 

the projector. 

Displays the type of the projector. 

Displays the serial number of the 

projector. 

Displays the model no. of the lamp 

unit. 

Displays the serial number of the 

lamp 1. 

Displays the serial number of the 

lamp 2. 

Displays the main version of the 

firmware of the projector. 

[SUB VERSION] Displays the sub version of the 

firmware of the projector. 

Displays the network version of the 

projector. 

 

z

[POWER ON TIMES]: 

Displays the number of times the 

power is turned on. 

 

z

[LAMP1 ON]: 

Displays the number of times the 

lamp 1 is turned on. 

 

z

[LAMP2 ON]: 

Displays the number of times the 

lamp 2 is turned on. 

 

z

[SHUTTER]: 

Displays the number of times the 

shutter function is used. 

Displays the details of the usage time. 

Displays the details of the usage time. 

Displays the number of registered 

signals.  

Displays the control status of the 

REMOTE2. 

*1:  The lamp lighting time displayed is actual time. 

The following conversion is required to calculate the 

guideline for lamp replacement. 

Time to replace the lamp = 

The usage time when [LAMP POWER] is 

set to [HIGH] + 

(the usage time when [LAMP POWER] is 

set to [LOW] x 2 ÷ 3)  

 

z

The contents of the status can be sent via E-mail 

when the <ENTER> button is pressed while the 

status is displayed.