Panasonic PT-DZ21KU User Manual

9)  Press ◀▶ to switch between enable/

▶

z

The setting will change as follows each time 

you press the button.

Enables button operations.

[DISABLE] Disables button operations.

10)  Press ▲▼ to select [APPLY], and 

▶

z

The confirmation screen is displayed.

11)  Press ◀▶ to select [OK], and press 

 

z

When a button operation is performed on the 

device set to [DISABLE], the 

PASSWORD] screen is displayed.

Enter the control device password.

 

z

The 

[CONTROL DEVICE PASSWORD] screen 

will disappear when there is no operation for 

approximately ten seconds.

 

z

It will not be possible to turn off the power (standby 

status) if the operations of both of [CONTROL 

PANEL] and [REMOTE CONTROL] are set to 

[DISABLE].

 

z

When the setting has completed, the menu screen 

will disappear. To operate continuously, press the 

<MENU> button to display the main menu.

 

z

Even when button operation on the remote control 

is disabled, the <ID SET> button and the <ID ALL> 

button are enabled.

The control device password can be changed.

1)  Press ▲▼ to select [CONTROL 

▶

z

The 

CHANGE] screen is displayed.

3)  Press ▲▼◀▶ to select the text, and 

4)  Press ▲▼◀▶ to select [OK], and 

▶

z

To cancel, select [CANCEL].

 

z

The initial password when used for the first time or 

after initializing all the user data is “AAAA”.

 

z

Change the password periodically that is hard to 

guess.