Panasonic PT-DZ21KU User Manual
Connecting
ENGLISH - 45
Getting Started
▶
■<DVI-D IN> terminal pin assignments and signal names
Outside view
Pin No.
Signal name
Pin No.
Signal name
(17)
(24)
(16)
(9)
(1)
(8)
(1)
T.M.D.S data 2–
(13)
—
(2)
T.M.D.S data 2+
(14)
+5 V
(3)
T.M.D.S data 2/4 shield
(15)
GND
(4)
—
(16)
Hot plug detection
(5)
—
(17)
T.M.D.S data 0–
(6)
DDC clock
(18)
T.M.D.S data 0+
(7)
DDC data
(19)
T.M.D.S data 0/5 shield
(8)
—
(20)
—
(9)
T.M.D.S data 1–
(21)
—
(10)
T.M.D.S data 1+
(22)
T.M.D.S clock shield
(11)
T.M.D.S data 1/3 shield
(23)
T.M.D.S clock+
(12)
—
(24)
T.M.D.S clock–
Connecting example: AV equipment
▶
■For <HDMI IN>/<VIDEO IN>/<LAN> terminals
The following diagram is a connecting example for PT-DZ21KU and PT-DS20KU.
Blu-ray disc player
VCR (TBC built-in)
Computer for control
Attention
z
Always use one of the following when connecting a VCR.
–▶A VCR with built-in time base corrector (TBC)
–▶A time base corrector (TBC) between the projector and the VCR
z
If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base
corrector (TBC) between the projector.
Note
z
The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not
appear or may not be displayed properly on some devices. (
page 92)
z
The HDMI cable used should be an HDMI High Speed cable that conforms to HDMI standards. If a cable that
does not meet HDMI standards is used, video may be interrupted or may not be displayed.
z
The <HDMI IN> terminal of the projector can be connected to an external device with an DVI-D terminal by
using a HDMI/DVI conversion cable, but some devices may not project the image properly or function properly.
z
The projector does not support VIERA Link (HDMI).