Panasonic PT-DZ21KU User Manual
[3D SETTINGS] menu (PT-DZ21KU and PT-DS20KU only)
84 - ENGLISH
Settings
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1) Press ▲▼ to select [3D INPUT
FORMAT].
2) Press the <ENTER> button.
▶
z
The
[3D INPUT FORMAT] screen is displayed.
3) Press ▲▼ to select a 3D format.
4) Press the <ENTER> button.
4) Press the <ENTER> button.
[AUTO]
*1
Automatically detects 3D format of
input image signals and displays
images.
[NATIVE]
Forcibly displays images in 2D
regardless of input image signals.
[SIMULTANEOUS]
*2
Forcibly displays 3D images in
simultaneous format regardless of
input image signals.
[SIDE BY
SIDE]
Forcibly displays 3D images in side
by side format regardless of input
image signals.
[TOP AND
BOTTOM]
Forcibly displays 3D images in top
and bottom format regardless of
input image signals.
[LINE BY
LINE]
*3
Forcibly displays 3D images in line
by line format regardless of input
image signals.
[FRAME
SEQUENTIAL]
*4
Forcibly displays 3D images in frame
sequential format regardless of input
image signals.
*1: During DVI-D or HDMI input only
*2: During 3G-SDI level B input only
*3: During signals other than interlaced signals are input
*4: During RGB1, RGB2, DVI-D, and HDMI input only
Note
z
When set to [AUTO], [SIMULTANEOUS], [SIDE BY
SIDE], [TOP AND BOTTOM], [LINE BY LINE], or
[FRAME SEQUENTIAL], images are not displayed
in 3D as per the [3D SIMUL INPUT SETTING].
However, this only occurs in [AUTO] when 3D
format can be recognized.
z
This may not function properly for some external
devices that are connected.
[LEFT/RIGHT SWAP]
Flips the timing of the switch between the left and
right of an image to display. Change the setting if the
3D images you see appear strange.
1) Press ▲▼ to select [LEFT/RIGHT
SWAP].
2) Press ◀▶ to switch [LEFT/RIGHT
SWAP].
▶
z
The setting will change as follows each time
you press the button.
[NORMAL]
[SWAPPED]
[NORMAL]
If the 3D images are displayed
correctly, do not change the
[NORMAL] settings.
[SWAPPED]
Select when left and right 3D
images are swapped to be
displayed.
Note
z
This is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].
[3D COLOR MATCHING]
Switches the color matching correction data applied to
the displayed image.
1) Press ▲▼ to select [3D COLOR
MATCHING].
2) Press ◀▶ to switch [3D COLOR
MATCHING].
▶
z
The setting will change as follows each time
you press the button.
[SHARED 2D/3D]
[SEPARATE 2D/3D]
[SHARED
2D/3D]
2D signals and 3D signals use the
same correction data.
[SEPARATE
2D/3D]
2D signals and 3D signals use
different correction data.
Note
z
Keep the signal you want to adjust input when you
switch the [COLOR MATCHING] (
page 88) setting.