Panasonic PT-DZ21KU User Manual

▶

■[INPUT GUIDE]

Set display of the input terminal name, signal name 

and memory number currently selected in the position 

set by the [OSD POSITION].

 

z

The setting will change as follows each time you 

press the button.

▶

■[WARNING MESSAGE]

You can set the display/hide of the warning message.

 

z

The setting will change as follows each time you 

press the button.

Set the color of the projected image when there is no 

signal input.

1)  Press ▲▼ to select [BACK COLOR].
2)  Press ◀▶ to switch [BACK COLOR].

▶

z

The setting will change as follows each time 

you press the button.

The entire projection area appears 

blue.

The entire projection area appears 

black.

The Panasonic logo is projected.

The picture registered by the user is 

projected.

 

z

To create the image for [USER LOGO], “Logo 

Transfer Software” included in the supplied CD-

ROM is required.

Set the logo display when the power is turned on.

1)  Press ▲▼ to select [STARTUP LOGO].

2)  Press ◀▶ to switch [STARTUP LOGO].

▶

z

The setting will change as follows each time 

you press the button.

The Panasonic logo is projected.

The picture registered by the user is 

projected.

No startup logo is projected.

 

z

The startup logo will disappear in approximately 15 

seconds.

 

z

To create the image for [USER LOGO], “Logo 

Transfer Software” included in the supplied CD-

ROM is required.

Correct the brightness and color unevenness of the 

entire screen.

1)  Press ▲▼ to select [UNIFORMITY].
2)  Press the <ENTER> button.

▶

z

The 

[UNIFORMITY] screen is displayed.

3)  Press ▲▼ to select an item.

▶

■To set per color

5)  Press ◀▶ to switch.

▶

z

Adjust the setting to a value from [–127] to 

[+127].

▶

z

Press ▶ .

Deepens upper colors.

Press ◀ .

Deepens lower colors.

▶

z

Press ▶ .

Deepens colors on the left.

Press ◀ .

Deepens colors on the right.